TGB1N-MV+MN1 overvoltage and No-voltage release is mainly used in AC 50/60Hz with rated voltage of 230Vand is assembled with the TGB1N series miniature circuit breaker with frame rated current 125A at the right side for overvoltage and No-voltage protection.
Available Standards:IEC 60947-2
Basic Parameters | |
Modules | 2(18mm) |
Working voltage(Overvoltage V AC) | 280±5%(single phase,three phase four-wire) 460±5%(three phase) |
Working voltage(No-voltage V AC) | 170±5%(single phase,three phase four-wire) 300±5%(three phase) |
Overvoltage and No-voltage life | 500 times |
Max.wiring area(mm²) | 2.5 |
TGBIN-OF auxiliary contact is used in the AC 50/60Hz line wi...
TGB1N-SD(for 63 shell frame)alarm contact is used in the AC ...
TGBIN-MX+OF shunt and auxiliary release (hereinafter referre...
TGB1N-MV(for 63 shell frame)overvoltage release is mainly us...
TGBIN-MN(for 63 shell frame)No-voltage release (hereinafter ...
Here you can send us an inquiry concerning general questions
about TENGEN.
Our site uses cookies to provide you with a better onsite experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Cookie Policy.
I Accept