BH-0.66I series current transformers are suitable for current and electric energy measurement or relay protection in AC lines with a rated frequency of 50Hz and a rated voltage of 0.66kV and below.
The product is a plastic case current transformer that is widely used in complete cabinets.
Working environment conditions:
1.1 Installation site: indoors.
1.2 Ambient temperature: -5ºC to +40ºC; the mean daily temperature does not exceed +30ºC.
1.3 Altitude: Not exceed 1000m.
1.4 Atmosphere conditions: When the maximum temperature is +40ºC, the relative humidity of air does not exceed 50%, and the allowable relative humidity at the lower temperature does not exceed 80%.
1.5 There is no serious dirt in atmosphere and no gas and conductive dust that may cause corrosion to metal
and damage to the insulation in medium.
1.6 The installation site shall be free of severe vibration and bump.
1.7 The installation site is not directly under the sun radiation without rain and snow erosion and serious mold.
With the advanced CPU control technology as core, TGS3 serie...
TGS51 series Enclosed Direct-on-line (DOL) Staters is mainly...
TGK1 series control and protection switchgear (CPS) is main...
TGLA1 series pushbuttons are suitable for the AC 50Hz/60Hz c...
TGAD1 series indicators are suitable for use in AC 50Hz elec...
Here you can send us an inquiry concerning general questions
about TENGEN.
Our site uses cookies to provide you with a better onsite experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Cookie Policy.
I Accept