BH(SDH)-0.66II
BH(SDH)-0.66II

BH(SDH)-0.66II

BH(SDH)-0.66II series current transformers are suitable for current and electric energy measurement or relay protection in AC lines with rated frequency of 50Hz and rated voltage of 0.66kV and below. The product is a plastic case current transformer that is widely used in complete cabinets.
The installation method can adopt the busbar fixing and baseplate fixing installation method. The product can be installed in any direction, and the primary wire can be a busbar or cable.
Available standard: IEC 61869-1.

BH(SDH)-0.66II

Inquiry

Certificate

Overview

Working environment conditions:

1.1 Installation site: indoors.

1.2 Ambient temperature: -5ºC to +40ºC; the mean daily temperature does not exceed +30ºC.

1.3 Altitude: Not exceed 1000m.

1.4 Atmosphere conditions: When the maximum temperature is +40ºC, the relative humidity of air does not exceed 50%, and the allowable relative humidity at the lower temperature does not exceed 80%.

1.5 There is no serious dirt in atmosphere and no gas and conductive dust that may cause corrosion to metal and damage to the insulation in medium.

1.6 The installation site shall be free of severe vibration and bump.

1.7 The installation site is not directly under the sun radiation without rain and snow erosion and serious mold.


Inquiry

LOGO

Zhejiang Tengen Electric Co., Ltd.

Sulv Industrial Zone, Liushi Town, Yueqing City, Zhejiang Province, China, 325699

+86 21 3119 8727

marketing@tengen.com.cn

Copyright ©2024 Zhejiang Tengen Electric Co., Ltd.

x

Contact our team

Here you can send us an inquiry concerning general questions
about TENGEN.

I have read and accept the Privacy Policy

Our site uses cookies to provide you with a better onsite experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Cookie Policy.

I Accept