TGHRT17 series fuse disconnector switch is mainly used in the power distribution circuit and motor circuit with rated voltage AC400V/AC690V (50Hz) and with high shirt-circuit current with an appointed heating current up to 630A as power switch, isolating switch, and emergency switch for circuit overload and short circuit protection, but cannot be used to directly start or stop the motor.
Inquiry
Certificate
| Product parameter | TGHRT17 Series Fuse Disconnector Switch | |||
| Appointed heating current Ith(A) | 160 | 250 | 400 | 630 |
| Rated working voltage Ue (V) | AC690 | |||
| Fuse body model | RT16Z-00 | RT16Z-1 | RT16Z-2 | RT16Z-3 |
| Rated working current Ie(A) | 2、 4、 6、 8、 10、 16、 20、 25、 32、 40、 50、 63、 80、 100、 125、 160 | 80、 100、 125、 160、 200、 250 | 125、 160、 200、 250、 315、 350、 400 | 315、 350、 400、 500、 630 |
| Fuse loss power (W) | 12 | 23 | 34 | 48 |
| Number of poles | 3P | |||
Working environment conditions:
1.1 The upper limit of the ambient air temperature does not exceed +40℃ , and the lower limit is not below -5℃ .
1.2 The altitude of the installation site does not exceed 2000m.
1.3 Humidity: The relative air humidity does not exceed 50% at the maximum temperature 40℃ , and a higher relevant humidity is allowed at the lower temperature, for example, up to 90% at 20℃ . Special measures shall be taken for condensations occurred occasionally due to temperature changes.
1.4 The pollution level of the ambient environment is Level 3.
1.5 The switch shall be installed vertically in a place where there is no obvious shaking, impact vibration, and rain and snow erosion, and there is no explosive and dangerous medium at the installation site, and no gas and dust that is sufficient to cause metal corrosion and insulation damage in the medium.
TGQ1N series automatic transfer switch is suitable for three...
TGQ1NP series automatic transfer switch is suitable for two-...
TGHD11N series disconnector switches is a new product develo...
HR17N series fuse disconnector switch is used in AC low-volt...
TGB1NLE-63Y series residual current circuit breaker with ove...
Zhejiang Tengen Electric Co., Ltd.
Sulv Industrial Zone, Liushi Town, Yueqing City, Zhejiang Province, China, 325699
+86 21 3119 8727
marketing@tengen.com.cn
![[图标]](/public/uploads/images/20220424/f95ac913521d4135916dfe3318828593.svg)
![[图标]](/public/uploads/images/20220424/6e75ac7746d8bcec75162168e55cb8e1.svg)
![[图标]](/public/uploads/images/20220424/aad23d901fef395775917db1313b5e1d.svg)
![[图标]](/public/uploads/images/20220424/a895ba8b25ce7f1af329cff0c9d06d08.svg)
Copyright ©2024 Zhejiang Tengen Electric Co., Ltd.
Here you can send us an inquiry concerning general questions
about TENGEN.
Our site uses cookies to provide you with a better onsite experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Cookie Policy.
I Accept
![[返回]](/public/static/modules/cms/images/g-fh.png)
Return List